Superstream 2K

385 Bar

Product description

Rubber High Pressure Hose, als suitable for hydraulic hose.

Superstream hoses are very flexible (check the bend radius) - smooth outside, abrasion - pressure - and oil resistant

Norm : EXCEED EN 857 TYPE 2 SC, EXCEED ISO 11237-1 2SC, ISO 1307.

  • Material outside      : Synthetic rubber MSHA approved
  • Material inside        : Synthetic rubber
  • Layers           : 2 (steel)
  • Colour            : black
  • Temp             : -40°C -> +100°C

 

  • "Hose :
  • Inside diameter     : ø 9,5 mm
  • Outside diameter    : ø 17,1 mm.
  • Bend radius        : 70 mm
  • Weight            : 440 gr./mtr.
  • Any length available up too 120 mtr..
  • Standard lengths ⅜"BSP male (nozzle) - ⅜"BSP swivel nut (hose reel)*
  • You also can choice : male - male / female - female connections.
  • Mostly ⅜"BSP male both ends so you can switch the hose around when one side is wearing our or demage.
  • 50 mtr. : ½"BSP male (nozzle) - ½"BSP Swivelnut (reel) , P/N : 0385002
  • 60 mtr. : ⅜"BSP male both ends. P/N : 0385003
  • 80 mtr. : ⅜"BSP male both ends. P/N : 0385004
  • 100 mtr. : ⅜"BSP male both ends. P/N : 0385001

Please note by changing the hose on your hose reel :

It's always advisable to put pressure on the hose before you wind it up the first time.

So completely unroll the new hose and connect it to the hose reel, mount the nozzle on the hose and put pressure on the hose (pressure you always use to work with)

All the windings are out of the hose and the hose expanded a bit, now you can wind the hose nice and neatly with a towel over the hose, the towle will clean the hose and the dirt won't press in the outside of the hose what can give little demage on the hose.

When you start working with the hose, the hose inside that you don't use do have enough room to expand, if you didn't put pressure on the hose at the beginning the hose stay small and don't have enough room to expand, the hose can get demage like cracks in the length direction and not usable anymore