Flex lance safety grip (deflector)

Product description

The FLEX LANCE SAFETY GRIP is designed to minimize the risk of injury to flex lance operators caused by a live nozzle exiting the tube unexpectedly.
 
The comfortably contoured handle makes it easy to hold the SAFETY GRIP against the tube sheet, allowing retraction of an active nozzle into a stainless steel sleeve where the force of the jets is dissipated.
 
The FLEX LANCE SAFETY GRIP is simple to install and is quickly adapted to handle various lance sizes by selecting the appropriately sized LANCE STOP.
Note: Three LANCE STOPS for the most common 4mm, 5mm and 6mm diameter hoses are provided with each SAFETY GRIP. Additional sizes are available separately.
 
Installation of LANCE STOPS: Simply unscrew the DIFFUSER from the SAFETY GRIP HANDLE, which will allow the LANCE STOP to be removed. Insert the new lance into the back of the SAFETY GRIP HANDLE.
Select the correct size LANCE STOP for the lance to be used and place it onto the lance behind the nozzle end fitting.
Insert the nozzle through the DIFFUSER and tighten the assembly into the HANDLE. (Note: the larger diameter end of the Lance Stop must be next to the end fitting.)
 
Part number: 35-009-000

Documents