Super Run Jet Nozzle
350 Bar
Product description
Super Run jets are special designed to clean halve-open or complete open drainage pipes (gutters) at public spaces like shopping area's - petrol stations - high ways - bridges and tunnels, don't spray through the overhead grille.
3-D designed for a excellent pulling power (long distance) and most effective cleaning result,
There were the Run Jet 1290-S is to heavy by low pump capacity you can use this one who is much lighter but same performance, excellent for flushing out sand & stones
The nozzle will float slightly during use and is therefor also very suitable for cleaning delicate isolation boards for cleaning dust, insects etc. The nozzle is than adjusted for maximum pump water flow and lower operating pressure.
Always use ceramic nozzle inserts for the best result, use all the water and don't go higher in pressure than 80 bar when using in open gutters, those nozzles are very powerfull
- Nozzle patern : 6 x M6 2° pulling / 1 x M6 0° front
- Dimensions : ø 45 x 60 mm.
- Connection : ½"BSP F
- Material : made of ware-resistant material and a hardness of HRC 55 for a long life
- Weight :0,5 kg.
- Cleaning area ø 70 - ø 150 mm.
- Min,.flow : 30 ltr./min.
- Part number : 1291-S (excl. nozzle inserts)
Open attached drawing for more details
This nozzle has a strong pulling power, which makes it excellent suitable for drilling open blockages. In March 2026, this nozzle will also be available with 3 additional M6 pre-jets at 20°.
- Nozzle patern : 6 x M6 2° pulling / 3 x M6 20° front / 1 x M6 0° front
- Part number : 1291-3 (excl. nozzle inserts)
Open attached second drawing for more details
- M6 ceramic nozzles outside hex. 1503. click here
- M6 ceramic Allen nozzles 1513 click here
- M6 st. steel outside hex. 1567 click here
- M6 st. steel Allen nozzles 1297 click here
- Bottle Loctite® for mounting the inserts click here
