Hose Whip Check

Product description

Hose Whip Checks  

We strongly recommend the use of "whip check" hose restrainers in any water jetting operation.

These are perhaps the simplest and least expensive safety measure to implement. A "whip check" can be attached at any point where two hoses are joined, or to a pumps fluid end at the discharge side, or where a hose attaches to any piece of water jetting equipment such as a waterjet lancing or cutting system.

When a high pressure hose is joined to a piece of equipment, the whip check should be used to restrain the movement of the pressurized hose should it become uncoupled, thereby allowing operators to get away and perform a safe, orderly system shut-down.

Larger and longer version is also widely used with vacuum hoses.

¼" - 1" Hoses: :

  • Dimensions : ø 3 x 530 mm.
  • Material : st. steel
  • Weight : 96 gr.
  • Part number : ZWR0553SS


¾" - 3" Hoses :

  • Dimensions : ø 6 x 970 mm.
  • Material : st. steel
  • Weight : 457 gr.
  • Part number : ZWR0554SS


3"Version vacuüm hose is the blue hose on the picture.