S Combination Nozzle
300 BarProduct description
This S Combination nozzle is compairable with the classic bom nozzle, only the pulling force is a little better because the nozzle angles are 10° / 20° ( classic bom 15° / 30°)
The two angle nozzle set gives a much better cleaning performance than the single angle nozzles and more “movement” in the water , most pulling nozzles are bigger orrifice for more pulling force, less pulling nozzles smaller for more cleaning perfomance on the wall = better cleaning performance.
Due its weight the nozzle stays better on the bottom of the drain and does not "float'
by using ceramic inserts they are suitable for use on a recycling unit, it;s eguiped with a front jet, so you can blind or fitted with a nozzle insert.
- Dimensions : ø 88 x 139 mm.
- Weight : 5,5 kg.
- Nozzles : 4 x M10x1F 10° / 4 x M10x1F 20° / 1 x M10x1F 0°
- Material : hardened steel
- Cleaning area > 400 mm.
- Part number : 0806-S
Open attached drawings for more details
- For M10 ceramic inserts click here
- Screwdriver for M10 P/N : 2950ST10 click here
- Socket wrench with cross handle for M10 P/N : 8023 click here
- Bottle Loctite® for mounting the inserts click here